Generally, when the continuous ink supply system is modified, the original ink cartridge will also be modified, so that it will inevitably cause a burden to the word car. When the load is too heavy, the carriage will move slowly, and the overload will also cause the accelerated aging of the printer belt and increase the friction between the carriage and the connecting rod, which will cause the printing speed to become slower. In severe cases, the word car cannot be reset and then cannot be used. There are three ways to solve this problem: a. Replace the motor. When the hose of the continuous ink supply system rubs against the wall of the printer, the electric motor load will increase. If you use the electric motor for a long time, we will try to replace it. b. Lubricate the connecting rod. Sometimes the low-speed printing is used for a long time. The friction between the carriage and the connecting rod in the machine becomes larger. The increase in resistance causes the electric motor to run slowly. At this time, the lubrication of the connecting rod can solve the problem ; c. The belt aging of the printing equipment, the frictional force of the driving gear connected to the motor will accelerate the belt aging of the printer. At this time, cleaning and lubrication can reduce the failure of the belt aging. It is also necessary to pay attention to the wiring of the continuous supply, and do not cause the pulling situation to cause the movement of the cart to be hindered. Since the internal structure of different printers is somewhat different, and does not provide support for conversion and supply, the wiring problem becomes the most encountered problem in the conversion and supply. This bald Mannequin Head is perfect for showcasing scarf`s or jewelry, making wigs, practicing make up, display wigs, hats, jewellery ,wigs can easily be pinned to the head, can also be used as home display. Doll Head,Bald Mannequin Head,Cosmetology Afro Wig Bald Head,Manikin Model Doll Head Xuchang Le Yi De Import And Export Trade Co., Ltd. , https://www.lileaderbeauty.com
The base hole can match most common clamp holders and tripod stands;sturdy, lightweight and durable. Bald mannequin head with mount hole ,do not need specific stand with clamp and the diameter is 1 inch.
Our wig making head is filled with soft PVC material and covered with smooth simulative of human skin. Do not fade, smooth to touch and good to use, suitable for professional or personal use.