Bulk Facial Tissue, Bulk Tissue Paper,Bulk Pack Facial Tissue ,Facial Tissue BODA ENTERPRISE LIMITED , https://www.bodapaper.com
1. Before printing, 1. Install a book version on the plate cylinder, adjust the machine, and leave space for books, magazines, feet, cuts, etc., and compare the edited page number with proofing proofs to prevent Mistakes caused by imposition, reversal, etc. caused by the printing quality accidents.
2. The content of the text on the printed page of the book needs to be > 3mm from the cutting edge, so as not to be cut when cutting. If you use a software such as CoreIDRAW, the text must be curved or framed. Otherwise, the font will be missing. After the text is turned into a curve, please pay attention to whether there are skipping or overlapping inconsistencies between characters or lines. Try not to use the system word. If you use it, it will cause the white nodes to be staggered. If there is a white node at the staggered point, it can be handled with a broken command. Do not use overprinting in black text.
3, the document format. Use CoreIDRAW9.0 Chinese version to design and produce documents. Due to the need of group edition, the documents designed with Mac will be converted into PC format.
4, wire frame thickness. All the input or self-drawn graphics in the book printing shall not be smaller than 0.1mm in the thickness of the wire frame, otherwise the printed matter will cause the situation of disconnection or rendering impossible. In addition, the wire frame cannot be set to "zoom with image", otherwise it will form an irregular line when printed out. When the gradient object is placed in the frame and it is accurately cut, it should be converted to a bitmap (the method is the same as point 6), because the placed frame gradient and other object groups do rotation, the gradient of The directions do not rotate together. In addition, the “edge width†cannot be set for any gradient object, because the interpretation of the output machine is different, and sometimes the gradient edge fill is insufficient.
Second, when printing 1, the color difference of the printing should be controlled effectively, in the color printing cannot print the color with the screen or the printer prints the color, the customer must make with reference to the percentage of CMYK chromatogram to decide. At the same time, note that the CMYK chromatograms produced by different manufacturers are affected by factors such as the type of paper used, the type of ink, and the printing pressure, and there may be differences in the same color patches. When the same document is printed at different times, the colors will be different, and the color difference degree recognized by the printing industry is within ±10% of normal (because the ink volume control will be different each time).
2, the use of color blocks. In color printing, the color of the color blocks should be avoided by using a combination of dark colors or full-size colors. Otherwise, cutting after printing can easily cause back-printing. Pay special attention to any pictures, patches, or lines that go beyond the size of the production and should always fit into the frame. Do not cover it with white patches, so as not to cause trouble during the closing. No less than 10% of the color of the printed book shading or base map should be printed to avoid rendering the finished product.
3. Post-press binding 1. It is better to insert a sporadic printed sheet or loose leaflet that is not enough for a saddle-stitch book publication into the middle position of the book, so as to avoid sporadic pages of books and periodicals appearing at the book-setting spine, such as falling pages, loose pages, etc. phenomenon.
2, the binding of personal books and books to see the P number, if the requirements are relatively high, P number is more, we can advise the customer to use the sewing thread to install or hardcover, lock line in order to avoid the pages of the book in numerous pages turned page off page phenomenon. Hardcover can make the customer's personalized books more upscale, beautiful and easy for permanent preservation.
Things to Consider in Order to Get Fine Print Publications
With the gradual expansion of the market, the printing industry has also undergone substantial innovation and transformation. The printing of books and periodicals has been received by different groups in the market. In particular, various kinds of creative individuality prints have received enthusiasm from people. However, we must not ignore the matters that need attention in the production of personalized books and periodicals.