Q: What capabilities do you think Heidelberg offset press should have? Teacher Zhong: In this offset printing competition, Heidelberg, as a lithographic printing equipment partner, provided strong support for the final venue and final equipment. At the same time, the technical qualification certification project also started at the same time. As long as the players participating in the finals of the Skills Contest can pass the Heidelberg assessment, we will issue the Heidelberg Speedmaster CD102 captain certification. First, as a qualified leader in the future, we must be able to give full play to the performance of printing press equipment. We have a feeling that there are a lot of Heidelberg's lead machines now, and they are operating very modern equipment as old machines ten years ago. This is something we feel very distressed about. This is the first point. Second, as a qualified leader, we will strengthen its understanding of the expansion of printing outlets, which is the most basic part of color management. Among the masters who operate equipment in China, few people talk to them about network expansion; if they do n’t understand network expansion, they ca n’t talk about pre-press or CtP compensation; if compensation is never done, they will always be chasing the color. This matter is troubled. We hope to promote the change of printing philosophy, especially the captain can have a new understanding of color management, which will play a key role in the future improvement of China's printing industry. Question: Teacher Zhong, as a very senior training teacher and a judge of the first printing skills competition, what valuable suggestions do you have for skill registration and examination for the contestants who sign up for the second offset printing competition? Teacher Zhong: The advice I want to give them is as follows: First, after the candidate understands the test questions, we hope that he will think carefully about the details of the operation process. Normally they only need to operate on the computer, and the whole process should be carefully analyzed during the exam, and the middle process should not be wrong. From the experience of the last time, this point is very important. The players can carefully write down the operation process with a pen and follow the correct procedure, so that they will not be so nervous during the operation. Secondly, due to their skill-oriented performance in the past, the staff group ’s competition has not prepared enough time for this aspect of the written test. I suggest that they have time to read in advance according to the reference books issued by the organizing committee, and also let the theory of the written test Knowledge performance has improved. This is also very important, and the level of operation is high, but the theoretical basis is not solid, which will cause great constraints. Third, it is usually not a contestant mainly based on Heidelberg machines. We suggest that if there is a chance, before the exam, it is possible to do some practical experience on Heidelberg equipment, which will help them get good results in the future. Although we also provide a week of pre-final exam training, after all, the time for a week is very limited. If players can have some practical experience before this, it will be helpful for the exam. The organizing committee has announced the content of our examination, including the modulation of tri-color ink, identification of printing plates, identification of printing faults, written tests for troubleshooting, etc. Contestants should also pay attention to the above content, how to adjust the three-color ink, the faster and faster the correct method; how to identify the failure of the printing plate; how to eliminate the printing failure, etc. This type of intellectual content may be tested in the form of a written test. This part of the content can also be strengthened in advance, so that the overall performance and performance will definitely be greatly improved. Question: Teacher Zhong, Heidelberg equipment has a very high market share in China. Among them, there are still many small and medium-sized machines. If the captains of Speedmaster SM52 and SM74 participate in this competition, what special attention should be paid to it? Teacher Zhong: Apart from the different size of Heidelberg models, the entire operation mode is almost the same, because the interface we operate is the same. For the leader of minicomputers, if they also want to participate in the competition of large-scale equipment, he only needs to expand his experience to control the split layout. Compared with the small layout, it is difficult to operate. The biggest problem is the uniformity. The left and right widths have doubled, which is difficult to control. It is recommended to accumulate more experience of large-format equipment operation, and be able to master the control of a wider range of colors, which will definitely help the competition results.
Major media and medical research continue to remind people that a sedentary lifestyle is closely related to many health risks, such as back or neck pain, high blood pressure, heart disease, and obesity.
As one of the most professional Standing Desk manufacturers in China, we have been adhering to the business philosophy of "customer first, quality first" to this day, insisting on providing our customers with high-quality services and high-quality electric Height Adjustable Table and pneumatic lifting desk. Expand our product categories to meet the different needs of customers.
Pneumatic Lifting Desk,Pneumatic sit stand Desk,Pneumatic desk,pneumatic height adjustable desk,pneumatic adjustable desk Suzhou Uplift Intelligent Technology Co., Ltd , https://www.upliftecdesk.com