Introduce the installation of constant temperature and humidity tester

Installation of constant temperature and humidity tester machine

1. The installation location should consider the heat dissipation efficiency of this machine and easy to check and maintain.

2. The bottom of the machine is a freezing system, and the heat is relatively large, so when installing, the distance between the fuselage and the wall and any other machine should be at least 60 cm, in order to ventilate smoothly.

3. Set on a flat, non-vibrating ground. When installing and positioning, please adjust the four horizontal feet at the bottom of the fuselage to balance the fuselage to drain the inner box and prevent abnormal noise (please use a spirit level to check).

4. The constant temperature and humidity tester must not be exposed to direct sunlight and maintain indoor air circulation.

5. Please place the machine body in a separate space, not in public places or near flammable, explosive, and perishable chemicals, to avoid fire and personal injury in the event of failure.

6. The supply circuit and the drainage pipeline should be as short as possible.

7. Please avoid setting in dirty and dusty places, the surrounding temperature and humidity should be maintained at 10 ℃ ~ 30 ℃; 70 ± 10% RH, the machine can get the best and most stable operation, the consequences may lead to: The temperature of the constant temperature and humidity test chamber machine slows down or cannot reach the low temperature requirement, and the temperature and humidity control cannot be very stable.

8. No debris should be placed on the top of the fuselage to avoid the fall of heavy objects and damage to the property.

9. Don't hold the electric box, wire and motor as the propulsion fulcrum during transportation to prevent the electric box from being damaged, loose or causing unexpected failure.

10. The maximum inclination of the constant temperature and humidity tester should be below 30 °. At the same time, the body must be firm to prevent the body from falling, crushing or damaging the human body and property.

11. When the machine after positioning needs to be shifted again, please retract the four horizontal feet of the fuselage and then shift, and then adjust the balance to avoid damage to the machine.

Square Cosmetic Compact

We have many different kinds of square COMPACT CASE.

MOQ

12.000pcs

Delivery time

50-55days

Material

AS,ABS

Pan size

26mm & 36mm & 59mm & 81mm

color

Injection color,spray coating color and UV metalizing color

logo

Silk screan and hot staping

Packing

paper carton

Place of Origin

Zhejiang

We promise out standing service tailored to meet your demands. Our products are favored by many customers all over the world and are sold in Europe, North America, South America and Asia.
We are looking forward to your E-mail and establishing cooperative relationship with you! We would provide professional square Cosmetic Compact with good services for you!


Square Cosmetic Compact, Square Cosmetic Compact Case, Square Compact,Square Compact Case

ims Packaging Limited , https://www.ims-cosmetic-packaging.com