QD-YTW submersible soda heater is an energy-saving steam heater. It has rapid heating and good silencing effect. It can calmly heat cold (liquid) water to boiling point. Due to the use of a new sound-absorbing structure, the noise is reduced to less than 50dB, which solves the problems of traditional heating methods such as high cost, high noise, occupying the room of the machine room, and a large amount of installation engineering. The alarm is linked to a fully automatic hot water preparation system. Mobile Green Screen,Foldable Green Screen,Portable Foldable Green Screen,Portable Foldable Mobile Green Screen Dongguan Aoxing Audio Visual Equipment CO.,Ltd , https://www.aoxing.net
YTW submerged soda heater is equivalent to introducing steam directly into water, but it overcomes the fundamental defects such as large noise, unstable heating, cold and hot water partitioning, etc .:
1. Mute, no vibration: YTW heater adopts internal cyclone muffler structure, the noise is less than 50dB, no vibration.
2. High thermal efficiency: The steam is directly fed into the water without heat loss caused by the condensed water, the potential efficiency is 100%, and the energy efficiency is high.
3. Saving investment: The price of YTW heater is much lower than that of shell-and-tube heat exchanger. When the position of hot water tank is high, the hot water pump can be omitted.
4. Repeated heating: When YTW heater is used, the soda water is controlled separately, and the water in the water tank is heated repeatedly without the need to drain the remaining water in the tank.
5. Easy installation and maintenance: YTW heater has small size and light weight, easy installation and maintenance.
Structure description
The submerged steam heater is made of all stainless steel. The nozzle inside the heating is a small oblique hole. The steam is sprayed into the casing from the nozzle of the heater at a high speed, which has a strong ejection effect on the surrounding cold water. It enters the heater into the small hole and mixes with the steam at high speed for heat exchange for full heat exchange, and the high speed steam spirals up in the shell. The rotating water vapor formed has the function of absorbing steam and eliminating noise. At the same time, the heated water is continuously drawn out from the upper surface of the casing, driving the water flow around the heater, thereby heating the entire water tank to the water.
Install and use
YTW submersible soda heater is a flange interface. Connect the steam pipe into the water tank (pool) and connect with the flange:
1. A single heater should be installed in the middle of the water tank. When multiple units are used in parallel, they should be evenly arranged;
2. The bottom of the heater is about 200mm away from the bottom of the water tank, and it should be ensured that the heater submerges the heater by more than 100mm;
3. The steam pipes introduced into the water tank should be fixed and there should be no looseness;
4. Install a check valve on the steam pipeline near the water source to prevent water backflow accidents;
5. If there are impurities in the steam pipe (newly installed pipe system, which has not been used for a long time), a filter must be installed to prevent debris from clogging the nozzle;
6. Simply open the heater shell for cleaning, which is simple and easy.