The electronic whiteboard with the principle of laser tracking often has the problem that the handwriting written on the whiteboard cannot be displayed due to the improper use of the electronic pen and the eraser. So how do we use the electronic pen and eraser correctly? Hydrating And Moisturizing Mask Moisturizing Facial Mask,Hydrating Facial Mask,Moisturizing Mask,Hydrating Mask Guangdong Yueji Cosmetics Co., Ltd , https://www.mask-family.com
Improper use method is easy to shorten the service life of the electronic pen, we must first use a reasonable charging method in the process of using the electronic pen. The first time you use it, the electronic pen should be fully charged and fully discharged. Charge it for more than 12 hours and use it until there is no power. When charging normally, try to make it one-time full to avoid charging multiple times in a short time. In this way, the writing cannot be displayed due to insufficient power, and the service life of the electronic pen is extended.
When using the board wipe to wipe the whiteboard, keep it consistent and strong, and when using the large board wipe, wipe the whiteboard with a flat surface. At the same time, replace the wiper battery in time. In addition, the electronic pen should be placed on the pen holder when it is not charging and not in use. Do not connect the wire. The connection wire is for emergency use and can be stored away.
Maintenance of other accessories:
In order to ensure the normal operation of the electronic whiteboard, the electronic whiteboard's printer, paper pressure roller and paper feed roller, eraser and other accessories also need to be cleaned regularly. Before cleaning, you should first confirm that the power has been turned off and the power plug has been unplugged.
The print head of the printer can be gently wiped with a cotton swab dipped in alcohol to avoid touching the printer head and its surrounding parts with your fingers, so as not to make copying impossible.
Cleaning of the platen roller and feed roller: use a neutral tableware cleaner diluted with water to dampen the soft cloth, then squeeze it firmly, and carefully wipe off the dust or smudge on the platen roller and feed roller These stains cannot be removed. Wipe them with a cloth moistened with alcohol.
When the erasing surface of the eraser becomes dirty, you can use your thumb to press the following layers, and then remove the dirty layer; when the eraser becomes very thin, be careful not to scratch the corners of the eraser Damage the screen of the electronic board.