We are a reputable manufacturer creating various kinds of indoor and outdoor railings, fire pits, BBQ grills, façade elements, and floral arrangements.
Packing
Packing will by pallet/carton/ wooden box,according to different demand.
One of the biggest reasons for failures in the production of clothing inspection prints is so complicated is that we do not rely on the standard of survival. In addition to the limited information provided by product suppliers and technical publications, printers can only perfect their own production processes and learn which ones are effective.
In machine production, the first step in troubleshooting is to increase the ability to determine that something has changed since the beginning of the production run. By placing an approved test sample at the unloading position of the printing machine and at the end of the dryer, the failure can be found instantly by comparing the actual print with the sample.
Screen tension troubleshooting All of the variables that can change and cause problems on the printing press, those associated with the screen are always the most troublesome. When printing, your screen changes and the prints change accordingly.
Mesh tension is the biggest variable you need to focus on. In the production process, when the screen tension drops, the following problems will occur:
1. The screen tension drops, the pushing and pulling force of the squeegee becomes larger, and the dots increase, resulting in hue shift in the printing process.
2. The screen tension drops, causing the screen cutting ability to decrease, resulting in insufficient ink coverage.
3, the screen tension drops, the scratch resistance becomes smaller, but also in the image of the squeegee end of the shadow.
4. Instability of the screen causes registration problems.
In the case of monochrome printing, slight changes in tension have little effect on the quality of the print. However, in multi-color (color printing) printing, the color shift of the prints can easily reveal the change of the screen tension. As a compensation for low tension, you must increase the pressure of the squeegee and/or increase the off-gauge gap. Alternatively, you can try to stabilize the screen tension by using a repetitive stretched net frame to prevent problems in advance.
Moiré is always one of the most frustrating appearances when it comes to finding and repairing color printing. There are three forms of moiré:
The first kind of moire: When two or more halftone patterns appear on a positive picture, the conflict between them will cause moiré.
The second type of moiré arises from the conflict between the number of image lines and the screening angle.
The third kind of moire: This kind of moire is easily found. It results from the conflict between the pattern appearing on the screen and the weaving pattern on the garment.
Before the screen exposure, a simple positive image detection method was used. The first type of moiré was easier to find. If you line up the positives and find any type of pattern that is different from what you expected, you will immediately know that these unwanted patterns will be copied to the screen and will appear in the clothing. on.
Many print shops can almost completely eliminate the second type of moiré by using the correct screen tension and number of screens. If you add screens, make color separations, and use appropriate screens and correct (stable) screen tensions in the correct angle, in fact, the second type of moire problem will be printed from your clothing. Disappeared in production.
The third type of moiré is the most common and difficult to find in production. This is especially true if you miss the management of the first and second types of moiré in the production process. The first aspect to consider in the tortoise pattern is the repetitiveness of irregular patterns. If this pattern remains consistent from one printing platen to another, it is very likely due to screen and/or color separation. If the pattern changes from one printing platen to another, the result may be due to the conflict between the weaving of the printing substrate and the screening angle of the separation printing plate. It is assumed here that the printing platen is horizontal and the screen plate is parallel to the printing platen.
From this point of view, the relevant variables include the number of lines of the design work, the angle of the screening, and the weaving method of the clothing. If you are aware of the first few variables in the operation of color registration printing, your best bet now is to look at other garments with higher fabric quality or stitching to solve this problem.
Choosing the right fabric for the chromatic printing is critical because there are many fabric structures available. Fabrics with a high number of needles (1000/in. or more) perform better during trap printing because the printing surface characteristics of the fabric minimize the impact of the printing on the screen or the number of lines.
Registering issues For printers, registering is also a common issue that hinders productivity in print jobs. When misprint occurs, it may be because the squeegee pressure is too high and/or the screen tension is too low.
The solution is to maximize screen tension, minimize off-slot clearance, and minimize squeegee pressure. This situation is common when using wooden frames on automatic printing machines. Wooden frames are not dimensionally stable, so they can only give minimal support to the screen. The resulting low tension condition requires a larger squeegee pressure to push the ink through the screen.
Change in registration has also resulted from a number of reasons, including the fact that the printing platen is not kept horizontal, the screen plate is not parallel to the platen, and the printing machine is displaced.
pots, sculptures, and other specialized items made with CNC equipment. Corten wire is used in the welding of every junction. Remember that we offer a pre-weathering service and that we may give a bespoke service on Corten Steel; if you have a unique need, contact us here! Did you realize? Get in contact with us right now for a free price! We can make corten steel in any custom size or share you require.
-Constructed with Corten Steel
-Natural patina of rusty finish
-H 1500mm ( may be made 5ft high) ( can be made 5ft high)
- Handmade object
- Also available in an aluminum and stainless steel variant
- As the sculpture is left out in the elements, its patina will deteriorate and cure over time.
Name
CRustic Corten Steel Sculpture
Material
Corten steel
Cooking plate Size
Diameter 1000mm
Size
1500*1200mm
Weight
100KG
Packing
Pallet/carton/wooden box packing
Steel Sculpture,Steel Garden Art,Metal Garden Sculptures,Metal Art Garden
Henan Jinbailai Industrial Co.,Ltd , https://www.gardensteelarts.com