Leica DM1000LED biological microscope should be installed in the following installation sequence, namely the stage, condenser, fluorescent module, intermediate system, lens barrel, eyepiece, objective lens, lamp room and light source, polarizer, installation only need to be attached to an ordinary A screwdriver can be done. The following focuses on the installation points of the stage and condenser. Stage Before installing all the stages, make sure that there is no objective lens installation! Remove the screws located on the underside of the stage. Sample holder • Place the sample holder on the stage and use a screwdriver to secure the screws. 1. Sample holder locking bolt Coaxial gear Note: Coaxial gears can be mounted on the left or right side. • First, install the focus wheel on the side where the coaxial gear is to be mounted. The focus wheel is positioned by the magnet to ensure that the button is snapped into the determined position. On the other side, another focusing handwheel is fitted. 1. Precise magnet positioning of the focus ring • Loosen the locking screw on the left hand side of the front of the stage. Locking bolt • Slide the stage to the last position. • Fasten the coaxial gear with screws. 1. Install the coaxial gear • Move the stage back to the initial position and tighten the locking screw. Condenser • Rotate the condenser lens to the condenser. • Use the condenser height adjustment knob to rotate the condenser holder down completely. 1. Concentrator center 2. Condenser clamp screw 3. Condenser height adjustment • Loosen the clamp screw of the condenser, enough that the condenser can be inserted from the front. • Insert the condenser from the front into the condenser holder as deep as possible. Below the concentrating mirror, there is a locating pin that is positioned in the guide slot (concentrator holder). 1. Locating pin 2. Auxiliary concentrator LS • Pull out the condenser clamp clamp and set the condenser to the appropriate position. Condenser holder 1. Guide groove Lighted Mirror With Organizer Tray
This table mirror has the function of a storage box, which is convenient for us to organize our daily necessities, and the storage space is large and convenient and clean.
LED mirrors are ideal for makeup,shaving,face care and body care.They light up the space and make makeup applications easier.It is,therefore,better to use LED Cosmetic Mirror instead of ordinary mirrors for makeup. When the light is integrated in the mirror,you will have a clear view without shadows on your face because the light is directed towards you.The led makeup mirror create the illusion of more space and will brighten even the darkest corners. We find that when a space is darker with less natural light available, the addition of LED lighting with the mirror creates a beautiful ambiance that really opens up a space.
LED Mirrors are the ideal interior alternative for any household or commercial space that lacks natural light.
makeup mirrors are divided into many kinds, we have travel mirrors, portable mirrors, compact mirrors, mini mirrors and other styles, there are also many functions. Welcome to contact us!
Lighted Mirror With Organizer Tray,Lighted Makeup Mirror,Vanity Mirror With Lights,Lighted Mirror With Suction Cup Dongguan Powerme Tech. Co., Ltd. , https://www.powermetechs.com
Long-Lasting----The LEDs we use are very energy efficient, with an average lifespan of about 50,000 hours.