[ Chinese wardrobe network ] As people's living standards continue to improve, everyone's understanding of the decoration has also reached a level. The overall wardrobe is becoming more and more a must-have for modern family. Rail as one whole wardrobe hardware accessories, the whole wardrobe rails What types? This issue of China Wardrobe net wardrobe slides recommended, let's get to know it. [Introduction to the overall wardrobe slides] The overall wardrobe rails are divided into upper and lower wheels. The upper wheel is the guard wheel, which is used to make the door slide smoothly when pushed in parallel. The lower wheel is divided into hidden wheels, which are made of pure nylon to carry the weight. The semi-circular progressive rolling is the center of gravity through the wheels, so the horizontal line is pushed and pulled. The bearing capacity can reach 200 kg, the wear resistance is high, and the push-pull life can reach more than 300,000 times. [Overall wardrobe rail type] Bottom wheel drawer slide Length: 250~1000MM Bearing capacity: 20Kg~100Kg Type: (two sections) partial pull out and (three sections) full pull out Ball drawer slide Suitable for drawer length: 150~800MM (even above) Bearing capacity: 10Kg~100Kg or more Type: generally based on three sections At present, some brand wardrobes use a set of upper wheels (hanging rails), so that the lower wheel has to bear the weight and has a guiding effect. The pressure is too large, and it is easy to deform after two or three months, and the service life is not high. The brand wardrobe adopts two sets of upper and lower wheels, the upper rail guide and the lower rail load, so that the slide rail can be better protected, the maximum load of the slide rail can reach 200 kg, and the service life can be more than 300,000 times. Bunk Bed,Dormitory Beds,Metal Bunk Beds,Metal Bunker Bed AU-PINY FURNITURE CO., LTD , https://www.jiangmenaupiny.com