In the flexible packaging composite, the two-component polyurethane adhesive is a citron. In the dry compounding, the packaging using the two-component polyurethane adhesive is not only exquisite, but also not easy to be damaged during transportation, storage, and the like. Therefore, the use of two-component polyurethane adhesives for dry lamination has become the main technology for flexible packaging composites. The two-component polyurethane adhesive uses ethyl acetate as the solvent and is therefore an ester-soluble polyurethane adhesive. With the rapid rise of other polyurethane-based, water-based, and solvent-free polyurethane adhesives, the polyurethane adhesive market for flexible packaging has increased unpredictable variables and difficult to control factors, then, two-component polyurethane adhesive What is the future of the agent? Will other polyurethane adhesives replace the two-component polyurethane adhesives? Two-component polyurethane adhesive is still the mainstream product development path From the 1970s to the early 1980s, most of the common packaging compounds were made of one-component rubber adhesives, and high-grade packaging was made of two-component polyurethane adhesives. After the 1980s, the composites basically changed to two-component polyurethane adhesives as the leading compound, supplemented by extruded composite adhesives. China's two-component polyurethane adhesive developed in the middle and late 80s of the last century. At that time, there were several adhesive factories and research institutes such as Zhejiang New Oriental, Beijing Chemical Research Institute, and Shanghai Lianyin, for research and development. With the advancement and development of technology, the quality of domestically produced two-component polyurethane adhesives has steadily increased, and prices have become lower and lower, gradually winning the majority of the domestic market. Advantages of two-component polyurethane adhesives The following advantages of the two-component polyurethane adhesive make it the leading product in the polyurethane adhesive market in the next 10 years. (1) Good adhesion effect. High peel strength, suitable for a wide range of substrates, can be used for the composite of paper, PET, OPP, NY, PE, CPP and aluminum foil materials, with good composite quality and high composite strength. Requirements The main component of the two-component polyurethane adhesive is polycondensation with adipic acid and ethylene glycol as the main raw materials. The curing agent is made from toluene diisocyanate (TDI) and trimethylolpropane as the main raw material. It is worth noting that TDI will become toluenediamine (TDA) after hydrolysis at high temperatures, while TDA is a carcinogen. After the compounding reaction of the polyurethane adhesive, there will remain very few isocyanates, and the isocyanate will transfer through the film into the food after high-temperature cooking and hydrolyze to generate TDA. Therefore, if the packaging is used improperly, the food has potential carcinogenic danger. . In response to this situation, the United States Food and Drug Administration (FDA) strictly prohibits the use of aromatic polyurethane adhesives in retort packaging. Although China, Japan, Europe and other countries and regions do not expressly prohibit the use of two-component polyurethane adhesives, there are certain restrictions on the content of TDA. The content of TDA required by our country must not exceed 0.004mg/L to reduce the potential harm in packaging. Direction of development As the solvent of the two-component polyurethane adhesive is ethyl acetate, while ethyl acetate is not completely environmentally friendly and flammable, the development direction of the ester-soluble polyurethane adhesive is high solid content and low viscosity. From the analysis of domestic production status and economic development trends, in the next 10 years, ester-soluble polyurethane adhesive will occupy about 70% market share of polyurethane adhesive.
A sand clock glass is a transparent container that is used to hold sand in an hourglass or sand timer. The glass is typically made of durable material such as glass or plastic and is shaped in an inverted cone or bulb shape. The sand is placed in the upper bulb or cone, and as it flows through a small opening into the lower bulb or cone, it measures a specific amount of time. The sand clock glass allows for easy visibility of the sand as it flows, making it a popular choice for timing activities or games.
(2) Excellent anti-media properties. Resistant to acid, alkali, oil, hot and various oxide, chemical corrosion.
(3) Good cold resistance and heat resistance. Many food packages require cryogenic preservation or sterilization at high temperatures from 121 to 135°C. Two-component polyurethane adhesives can maintain good peel strength under the above conditions. 
Sand Clock Glass,Sand Clock,Borosilicate Sand Clock Glass,Triangle Sand Clock Glass
Xi'an ATO International Co., Ltd , https://www.ato2008.com