With the continuous improvement of the technology level and the gradual informatization of the business, the cash register system is widely used in various industries such as supermarkets and restaurants for its unique advantages. In the investigation of various industries and customers, the industry generally requires relatively high functionality for cash registers. Therefore, in order to avoid failures during use, many small details need to be paid attention to during use and need to be cleaned regularly. Cash register daily screen maintenance methods and precautions: POS cash register failure repair notice: Our new 6' Folding Plastic Bench, which is great for camping, hiking, party or dining indoors or outdoors. It features a high-density polyethylene top with tubular powder painting steel legs and a frame. It can be folded and extended easily to provide enough space to your guests and save room for storing it under a bed or in a closet. Rubbers on the legs can prevent your floor from scratches or any damage. Plastic Folding Benches,Foldable Plastic Bench,Folding Plastic Picnic Bench,Plastic Picnic Bench jiangsu concentric internatinal ltd , https://www.jsconcentriccorps.com
After the end of each day, we should clean it on time. When using the screen cleaning solution, spray the nozzle away from the cleaning part at a distance of 6cm and at a 45-degree angle. After 3 seconds, use the microfiber cloth. Wipe up and down until it is clean.
1. The cashier should wipe the body, display case, keyboard, etc. with a damp cloth every day.
2. When cleaning the cash register, you should turn off the power and then clean it. Dust particles from the screen gap can be cleaned by a brush.
3, the display screen is a liquid crystal screen, it is not easy to clean frequently, if you wipe the screen, it is recommended to use the screen-specific cleaning solution for cleaning, and then wipe the dust with a clean soft cloth.
4. Do not stick paper on the cash register.
5. The vent of the cash register is a place with a lot of dust. When cleaning, you can use a brush to clean the dust on both sides, and then wipe it with a soft cloth, which will be cleaner.
6. The cash register track also needs to be cleaned regularly. You can wrap the clean paper sheet around the magnetic card and then lightly brush it on the cash register magnetic card to clean the dust on the track. This method is very practical.
Most of the causes of malfunctions caused by POS cash registers are caused by dust in the machine. Therefore, we must pay attention to the maintenance methods for daily use of this product.
When we encounter such a fault caused by dust, we must pay attention to observe whether there is more dust inside and outside the faulty machine during maintenance. If it is, we should first carry out dust removal, and then carry out subsequent judgment and maintenance. In the dust removal operation, special attention should be paid to the following aspects:
1. Pay attention to the cleanliness of the air duct. During the cleaning process of the air duct, we must pay attention to the use of softer tools when wiping the air duct to prevent the air duct from being scratched.
2. Pay attention to the cleaning of the fan. During the cleaning process of the fan, it is best to remove the dust after the dust is removed from the fan shaft to enhance lubrication.
3, pay attention to the cleaning of the plug, seat, slot, card gold finger part, gold finger cleaning, you can use rubber to wipe the gold finger part. Removal of oxidation on the metal pins of the plug, seat, and slot: one is to wipe with alcohol, and the other is to gently scrape the metal pin with a metal piece.
4. Pay attention to the cleaning of the pins of large-scale integrated circuits and components. When cleaning, use a small brush or vacuum cleaner to remove dust, and observe the presence or absence of soldering and moisture on the pins, whether the components are deformed, discolored or leaked.
5. Pay attention to the cleaning tools used. Cleaning tools, first of all, are anti-static. For small brushes for cleaning, use a brush made of natural materials and disable the plastic brush. Secondly, when cleaning with a metal tool, the power must be turned off and the metal tool must be discharged.