Saitu Technology: Explain the four core values ​​of Besin CTcP

In 2011, it was a heavy year for the Chinese printing industry. In 2012, with the loosening of the tightening policy, the printing industry will be stable with the prosperity of the consumption and service industries. The policy of stimulating domestic demand is for the printing industry. Long-term positive. In the field of printing, in the past one or two years, the most noticeable is the prepress computer direct plate making technology. At the beginning of the new year, it is time to sort out your investment ideas. As the global leader in the general and UV platemaking technologies, Beth Print CTcP has four core values. Since the violet laser CTP has basically withdrawn from the commercial printing field, the following analysis and comparison are only made between thermal CTP, UV-CTP and bass printing.

One of the values: Bass printing equipment is expensive, but the cost of use is the lowest

1, CTP version, ordinary PS version (including uv-ps version) price trend

As can be seen from the figure, the price curve of the normal version and the thermal version is more and more gradual, and the price gap is more and more rigid. The reason is that the production cost of the CTP version is higher than that of the ordinary PS version, mainly because the plate base is different, the sand is different, and the number of coatings is different (two layers of ordinary PS plate, three layers of thermal plate, four layers of violet laser plate), etc. Thermal and photosensitive CTP plates are more expensive than regular PS plates. The rigid price difference between the CTP version and the UV-PS version is 7 yuan, and the rigid price difference between the CTP version and the normal version is 9 yuan. When the total amount of plate making is not large, the economic benefit of using Beth India is not obvious. When the plate making amount reaches a certain amount, it is most cost-effective to use Beth.

2, the ordinary PS version of the production capacity has declined, but due to the high printing durability, the lowest cost, easy to use and so on, the ordinary PS version will not exit the market. Bass printing customers generally use UV-version and ordinary PS version at the same time. When the printing durability is not high, use UV-PS version. When the printing durability is high, use ordinary PS version. If customers have reserved and pirated requirements, Suitable for ordinary PS version. Many platesetters and stencils can be interchanged and versatile between regular PS and UV-PS versions. Bass can use both the normal version and the UV-PS version, saving more than 20% of the cost compared to the UV-PS version of the UV-PS version.

3, the thickness of the plate printing is 0.12 ~ 10 mm, in the thin plate making, the bass printing has an unbeatable cost advantage, because the ordinary PS or UV-PS thin plate is only 14~16 yuan / square meter, and the heat The price of the thin version of the sensitive version is the same as that of the thick version, both above 30 yuan / square meter.

The core value of the second: For the large version of the mixed version of the plate-making center, the Bayesian printing is the most efficient

1. In all computer-to-plate platesetters, Bethmark is the only device with a platform structure. Its motion system is that the magnetic levitation exposure head only moves and exposes within the range of the plate, without the scope of the super-published material. This saves time. The exposure time of the bass print is proportional to the area of ​​the plate, while the exposure time of other drum motion system devices is proportional to the side length of the plate, plus the time required for the drum to reach a certain speed and stop, which is better than the bass print. long. Bass press exposes a split version at a speed of 2 minutes, and exposure to an eight-page version takes only 25 seconds. [next]

2. The following is the tracking statistics of the four customers' printing plates. Each user has a monthly average of more than 20,000 plates, and the average monthly plate-making volume of all Bass Print Center customers is around 15,000. We counted accounts: taking Nanchang customers as an example, 90% of his business is thin, the unit price is 45 yuan / square meter, the monthly average plate-making is equivalent to four open editions of 13,000, the monthly average turnover is 300,000, and the cost of sheet metal is 80,000. Management and personnel wages of 45,000, net profit of 175,000. In fact, the customer has recovered all equipment investment within 11 months after the equipment is put into production.

The following is a random selection of four prints of Besin's customer-made plates.

The third core value: the most easily overlooked factors: the best equipment stability and the longest equipment life

1. The stability of the bass printing equipment mainly comes from three aspects, one is the exposure system, the other is the magnetic levitation motion system, and the third is the water circulation cooling system.

● Besin's use of German-origin lasers, installed in a laser module, merged into the exposure system after fiber convergence. The biggest advantage of this structure is that the attenuation of a single laser tube does not affect the exposure quality.

●Bissy is the only plate-making machine with magnetic suspension motion platform. Its motion accuracy is +/-0.3 micron. The biggest advantage of magnetic levitation motion is frictionless, which can maintain motion accuracy for a long time. It can be used for high-intensity production day and night. No damage.

● Water cooling system, the important parts of the exposure system, motion system and control system of the Besin printing equipment are all water-cooled. The bass printing can keep the side-opening for more than one month, which is inseparable from the good cooling system. Other equipments use a relatively simple air-cooling system, which is unable to dissipate heat in a timely manner. High-intensity production causes temperature and is likely to cause equipment damage.

2, equipment life: Because Beth India has a unique exposure system, magnetic suspension motion system, water cooling system, etc., it can not only undertake high-strength and high-production, but also greatly extend the service life of equipment. The life of the Beth print can be more than fifteen years, which is unmatched by any similar equipment. Many domestic bass printing equipments have been used for seven or eight years and are still in good working order. It is best to prove that Bass Printing still sells 400,000 used equipment for 5 or 6 years.

The fourth core value: the latest model lion: a unique all-round plate making machine

1. Lion King: In 2012, the German company Besin Company launched the latest all-round plate making equipment lion (Lion King), which is a true all-around plate making machine! In addition to the most important offset plates, it can also be used in screen, resin, hot stamping and partial UV glazing. All functions are done on the same device without changing the settings. With the powerful features of Beth India, the plate-making center will better provide printing companies with integrated plate-making services, which will greatly expand the living space.

2, Lion full boot type: In addition to the well-known bass print on the boot and four boot, lion full machine is the most eye-catching, three formats are: the maximum format is 1375 * 2050, 1560 * 2100, 1560 * 3170mm The speed is 20 plates per hour.

In short, what kind of plate making machine to choose, there is no certain rules, apply it, save money, just make money, use it for a long time! For the competitive plate-making center, the purple laser mechanism machine rarely has no successful case; if there is no UV-CTP in the local, the thermal CTP can survive; if there is a UV-CTP plate-making machine, the thermal CTP is very Difficult to survive; in the fierce competition of many computer platesetters, the best in the ordinary version and UV version of the Beth India CTcP. If you choose Beth, time will bring value and prove that you are not wrong.

Article source address: http://

thermostatic faucets

Thermostatic Faucets,Sanitary Ware Shower Set,Shower Head Mixer Set,Shower Tub Set

Kaiping Yufa Sanitary Ware Co.,ltd , https://www.dlsenfaucets.com