Food Tong ,Noodle Tong,Meat Tong,Frying Tong NINGBO HOZ TRADING CO.,LTD , https://www.hoz-kitchenware.com
(Henan Province Xinhua Printing Plant No. 2 Li Lin)
Source: "Printing Technology"
M-600 edition experience
The factory introduced the M-600 commercial rotary press in October 2001. The M-600 adopts advanced automatic printing technology. The average change of a set of printing plates takes only 4 minutes. Before the last edition, in order to prevent the back of the plate from rubbing the suction nozzle, it is necessary to spray a layer of silicone oil on the back of the plate in advance, using a non-oily release agent (canned). At the beginning, we sprayed the release agent on the back of the plate. , Spraying less, when the "crashed" ring, increase the amount, so down a set of version almost need a can of release agent; also observed in the automatic version can only correspond to 5 nozzles The backside of the plate is sprayed with a release agent, so the ink roller frame for the maintenance machine is slightly modified according to the position of the suction nozzle and the corresponding plate, and a sufficiently long steel ruler is fixed at the top of the plate, where the film is to be sprayed. After making a mark, after bending the plate, the cornice of the plate is hung on the cutting rule and the film is sprayed off according to the mark. This saves about 70% of the release agent and has received good results. In addition, the roller linoleum was found to be able to play one more hole and be used twice. When the wear is serious, the adjustable head can be used. The effect is also good.