·LAPTOP CART - Premium laptop tray allows
you to use your laptop or notebook comfortably wherever you like.
·MOBILE PROJECTION STAND - Designed to
place a laptop and a projector side by side for use as a presentation cart.
Stable base and heavy-duty locable casters or fixed pad provide superior
stability.
·ADJUSTABLE HEIGHT ROLLING DESK - Lift
and lower the height of the platforms to your needs.
·VERSATILE USES - Use it as Overbed Table
tray, laptop cart, medical tray or as a projector stand. Tilt and height
adjustment allows multiple positioning optoins.
Standing Mobile Laptop Cart stand up
workstation helps you practice good posture and ergonomics while relieving
pressure on your back to reduce unnecessary strain on neck, back and shoulders.
The low base allows you to use it as a Laptop Desk while sitting on the couch or
bed.
Easily assembles in just minutes. Light weight single post design saves space, while the extended four leg base ensures stability while sitting, standing or moving.
The ink was subjected to freezing and heating tests for a certain period of time to observe whether the ink was gelled or reversed.
2, tools and materials (1) can accommodate 20g ink tin.
(2) Automatically controlled incubator.
(3) Self-controlled freezer.
(4) Flowmeter.
(5) Ink transfer knife.
(6) Transparent scale (scale value 1mm).
3, inspection methods
(1) Store the tested ink in two iron boxes, each containing no less than 15g of ink. The ink in the box should be filled with air bubbles. Seal the cellophane with a mark and put the box in place. Into the 75-80 °C controlled thermostat and -15 ~ -20 °C freezer within 72h removed and stored at room temperature.
(2) The test inks stored at room temperature for more than 3 hours were measured according to the “ink flow test method†and compared with the inks not subjected to the heating and freezing tests.
(3) According to the difference between the fluidity of the tested ink and the performance of the ink, determine whether the tested ink is stable according to the following regulations.
1 The fluidity after the test was not so great as that before the test. The ink was stable.
2 After the test, the fluidity is much larger than before the original test, and the ink property is still good. This ink is unlikely to gel, but it is not stable enough.
3 After the test, the fluidity was smaller than before the test. The change of the ink property to “short†and “stand†was a tendency of gelation. Generally, the ink was only easy to gel.
4. Notes (1) The freezing test method is mainly used to determine whether it is anti-coarse.
(2) Heat test to determine if gelation is possible.
Laptop Cart,Laptop Stand Portable,Stand Desk Balance Board,Desk Stand for Cell Phone
Foshan Hollin Furniture Co.,Ltd , https://www.china-hollin.com