When placing the material in the stack, the ruler should be placed on the side of the pile, and each column should be placed with a ruler. One can ensure that the upper and lower edges of the stack of materials are neat, not skewed, and the other can ensure that each column is in a vertical position. on-line. The pile of the material placed in the code is a rectangular parallelepiped structure. In the cuboid, a layer of plate, a layer of spacers. The gap between the two sheets separated by the spacers is the future horizontal air passage. The drying medium passes through the gaps in the upper and lower surfaces of the sheet to allow the sheet to be quickly and evenly dried. The material pile of the kiln is used. The length and width of the pile should be equal to the length and width of the material, and the height should be such that the pile can be pushed into the kiln door without much space. The upper part of the pile should be stacked with defective low-grade wood and pressed to cover heavy objects. When loading a kiln with a forklift, the size of the small pile of the unit may be determined according to the specific situation. The large pile of the small pile of the unit piled up in the kiln shall not exceed the specified limit. The role of the spacers in the pile is very important. In addition to the horizontal airflow passages in the various levels of the pile height, it also plays a role in maintaining the stability of the pile and preventing and reducing the warpage of the wood. Therefore, it should be used correctly. The section of the spacer should be made into a square of 25x25mm. If the board processed by the manufacturer is mainly made of thin sheets, if the thickness of the board is less than 25mm, the thickness of the spacer should be thinner, if the board processed by the manufacturer is mainly thick. If the thickness is greater than 45mm, the thickness of the spacer should be appropriately thicker. The length of the spacer should be equal to the width of the pile. The spacing of the spacers should correspond to the thickness of the strip. In short, the sheet is thin and the spacing between the strips is small; the sheet is thick and the spacing between the strips is large. The spacers of each layer shall be vertically aligned and maintained on a vertical line at the height of the pile. The bottom spacer shall be placed on the beam at the bottom of the pile, and the two rows at the end of the pile shall be separated. Articles should be flush at the board end. The spacer material is suitable for hard hardwood, which can ensure that the thickness and size of the spacer are not changed much when recycled, and the service life is long. Vertical placement of the spacer Stacking diagram
The floating Shelves is one of the main products we produce in our factory, with a variety of different designs and solid structures, you will love our products, all our products are designed in-house.
Decorating your hall way with floating shelf, you never need to worry about the space for keeping your books, housewares, etc..
Our Storage Furniture is Assemble easily. Made of high-quality material with exquisite workmanship, natural, environmental-friendly, safe, sturdy and durable to use. We have wide selections storage furniture to help you get good choice .
We can use them as a bookshelf or a storage furniture in the living room. We can also use them as a showing furniture .You can put some books or artworks on them.
The storage furniture doesn't take up too much room,but it can help us put the things in order.
Floating Shelf,Wall Shelves,Wall Mounted Shelves,Floating Bookshelves Baklam , https://www.jmbaklam.com
