Faucet is the popular name of the water valve, used to control the size of the water flow switch, a water-saving effect. The structure of the faucet seems to be extremely simple, but to install the faucet seamlessly, it is still necessary for the next effort. Next, Xiao Bian introduces you to the faucet installation method and installation precautions in detail. Firstly, prepare the installation tool and check whether the supporting parts are complete before installation. The common leading spare parts include: hoses, rubber gaskets, showers, water removal, kidnappers, and decorative caps. 1. Single hole basin faucet installation When buying single-handle basin faucet, you should pay attention to the outlet diameter. Now most of the market is a hard-tube inlet, so you should pay attention to the height of the reserved inlet, the most appropriate from the basin downward 35 points. When installing, it must be equipped with a special angle valve, and the angle valve must be fixed with the hot and cold water pipes of the wall outlet. When you find a distance between the angle valve and the faucet hose, buy a special extension tube to connect. Remember, do not use other pipes to connect, because if the water pressure is high, it is easy to fall off, leak, and cause losses to you. If the inlet pipe is longer than the outlet pipe, you can cut it off according to your needs. If the angle is not appropriate, you can bend it to your desired position. Remember: Do not bend hard to 90 degrees or more than 90 degrees. When installing the basin to remove water, do not forget to purchase the faucet's small connector (short for the faucet). Don't forget to flush the water pipe buried in the wall before you install it. 2. Shower, bath mixer (wall) installation When you have purchased showers, bathtubs, wall taps, you can choose the appropriate height to bury the water pipe. Hot and cold water pipes must be spaced 15 cm apart. Before installation, you must not forget to flush the water pipe to avoid excessive water quality and damage the mixer. Concealed shower, bath faucet: After purchasing a concealed faucet, it is generally necessary to embed the valve plug of the faucet in the wall. Be sure to pay attention to the thickness of the bathroom wall before embedding. If the wall is too thin, the valve plug cannot be embedded. The plastic protection cover of the valve plug should not be easily removed when it is embedded, so as to prevent the cement and other chores from damaging the valve plug when it is embedded. In addition, when embedding the valve core, it should also pay attention to the direction of the valve core up and down, left and right, so as not to miss the valve core. Wall mounted faucets are pre-installed into the water pipe with dimensional deviations that can be adjusted using the available adjustments. 3. Thermostatic faucet installation Before installing the thermostat, please check whether the water pipe is hot or cold. Remember not to connect the hot and cold water pipes incorrectly to prevent the faucet from working properly. Gas and solar water heaters cannot use thermostats because the water pressure is too low. Do not forget to install the hot and cold water filter when installing the thermostat. 4. Single hole kitchen faucet installation The requirement is stable, because the kitchen mixer is used frequently, and it is easy to loosen and move it. Therefore, the lock nut must be tightened. At present, there are some faucets on the market that use nuts to fasten the nuts. This kind of stability is very good. If you can solve the problems of removing water, it will be a popular trend in the future. Faucet installation notes Now, many of the faucets produced by the regular home improvement building materials companies are accompanied by installation drawings and instruction manuals. Today we talk about the installation of the faucet. When installing, pay close attention to 7 points. 1, please have experienced and qualified professionals to install. In particular, imported high-end products, small washers and small accessories, must be installed step by step in accordance with the drawings in order to ensure that there will be no leakage and other issues. 2. When installing, the faucet should try not to collide with hard objects, and do not leave cement, glue, etc. on the surface, so as to avoid damage to the surface plating luster. 3. If your faucet is used in the construction of a new house, because the water supply pipe network is a new one, there will certainly be impurities such as sand grains in the water. Be careful to remove the debris from the pipe before installation. Leave the water for a long time until the water quality becomes clear before installing the faucet. . 4. Do not use too much force to cause man-made damage when you turn it on and use it. Even traditional taps do not need to be screwed to death. After use, the faucet surface should be wiped clean. Do not use the handle as a handrail to support or use. 5, in the case of water pressure not less than 0.02mpa, after using for a period of time, if you find that the amount of water is reduced, or even the phenomenon of water heaters turn off, cut off the flow of hot and cold water, use a wrench to gently screw down the faucet outlet Screen cover, carefully cleaned after cleaning impurities, generally can be restored as ever. 6. The showerhead metal hose of the bathtub faucet should be kept in a natural stretch, and should not be coiled on the faucet when not in use. At the same time, when using or not using, pay attention to the joint between the hose and the valve body not to form a dead angle, so as not to break or damage the hose. 7. When scrubbing faucets, do not use acidic and basic solvents. After using the faucet for a period of time, if the amount of water is found to be reduced, use a spanner to unscrew the faucet strainer and clean it carefully before installing it. <\p><\div> In terms of material, European-style dressers are generally made of birch, rubber wood, fir, etc., which are combinations of wood or MDF, MDF and other man-made boards. For example, the countertop is mainly made of wood and lacquered countertops, which are smooth and smooth, highlighting high-end fashion. Mdf Dressing Table,Mdf Dressing Table With Mirror,Vanity Table With Touch Screen,Mdf Dressing Table With Drawers Jinan Tri-Tiger Technology Development Co., Ltd , https://www.tritigerwooden.com
In terms of shape design, the delicate workmanship integrates the elements of rural life, and inherits the romantic elements of European classical home furnishing. The sleek and smooth lines reflect dignity and romance in the simple and elegant, and the piano-style shape is fashionable and unique, highlighting the high-end taste of the entire home.
In terms of detailed design, European-style dressers are mostly white and smooth lacquered countertops, elegant curved legs, lovely animal horns, and fine carvings inlaid with gold and silver, all of which reflect its nobility, splen
dor, and dazzling brilliance, creating every perfection. Flawless details, giving people aristocratic enjoyment. The outline and turning parts are composed of symmetrical and rhythmic curves or curved surfaces, and are decorated with gold-plated copper ornaments, imitation leather, etc. The structure is concise, the lines are smooth, and the artistic sense is strong. The overall feeling is luxurious and elegant, very solemn.
In terms of space decoration, the European-style dresser loves the romantic feelings of European-style furniture, draws on the design art of European continental furniture, and integrates the natural beauty of marble and the luxurious beauty of gold-plated hardware decorations. With a sense of ownership, it exudes a strong European style, low-key, elegant and noble. European pastoral dressers are decorated with soft fabrics, warm wallpapers, lovely picture frames, and vibrant green plants. European style Dressing Table delicate and compact decorative box can store small jewelry, convenient and practical.
The European-style dresser integrates classic elements into the aesthetics of modern people, and uses advanced manufacturing technology to interpret neoclassicism. Its simple and classical shape is very unique and full of retro atmosphere, adding an elegant and noble temperament and taste to the space.