1 The standard of the old kitchen of the last century, the most common is the use of the cabinet with the cabinet. I thought that nothing was a big cabinet that could not be solved. But close to the ceiling, there is a big difference in height, because even if the cabinet is installed in the home, it does not improve any storage efficiency. The traditional old kitchen is time to change. The wall-mounted closet hides all the storage in the wall. 2 Design different opening methods in different functional areas of the kitchen. For example, the middle part is used to place pots and pans, and the refrigerator is generally placed at the outermost periphery of the closet. 3 In order to improve the storage efficiency of the kitchen, the partition can be used to make full use of the area around the corner. 4 Or half of the cabinet combination of half of the cabinet, the functional area will be re-divided. 5 The combination of the partition and the hanging cabinet is interspersed with the interior of the cabinet. 6 The longest used oil and salt sauce vinegar is placed on the partition to ensure the clean and orderly environment of the kitchen. 7 8 There are also some more innovative practices that completely abandon the traditional wall cabinets and transfer all of their storage needs to the cabinet. 9 10 11 In addition, some families are now more inclined to this type of high cabinet combination. In addition to the storage area, the high cabinet connected to the ceiling and the ground is also a tool for partitioning. 12 13 A wooden partition with a hood as the center of the center of the hood covers the entire wall. 14 A beautiful brass line that acts like a wooden partition. 15 It is often used for the placement of all kinds of pots and spoons in the home and has a very delicate sense of home. 16 17 For some families in Japan, in order to save more area, the hood and the partition are re-made as a storage combination.
Powder distributor:After receiving the coffee powder, use a powder dispenser to spread the powder. The purpose is to ensure that the coffee powder is evenly distributed and to avoid inconsistent density when filling and pressing.
We have multiple sizes of powder distributor to suit your portafilter size, 51mm,53mm, 54mm, 58mm.
Coffee tamper, fill the powder after the powder is filled, the direction of the filling should be vertical to the powder bowl, the strength should be moderate, not too light or too heavy, too light will make the coffee powder loose, too heavy will make the coffee powder compact and dense If it is too large, it is difficult for the water flow to pass through the coffee powder cake, resulting in excessive extraction.
Coffee Tamper,Espresso Tamper,Coffee Distributor Tamper,Coffee Distributor And Tamper Jiangmen Chang Kun Industrial Co., Ltd. , https://www.changkun-houseware.com
