Due to its inherent characteristics, solid wood furniture has less resistance to external factors such as heavy pressure, air humidity, and scratching. Therefore, although solid wood furniture is popular and popular, it is often a long-term process. Today, Meijun Pure Blue Mountain http://mjcmls.cnjiaju.com will share with you the maintenance methods of solid wood furniture. First, daily dust removal The most basic thing in daily maintenance is to keep the furniture clean. Use soft cotton cloth to wipe off the dust on the furniture surface along the direction of the wood texture. Before dusting, apply a cleanser on a soft cloth. Do not use a dry cloth to wipe the surface of the furniture. At intervals, use the wet cotton thread that wrings out the water to clean the dust from the wooden furniture, then wipe the wooden furniture all over again, then dry it with clean dry soft cotton cloth. Second, stain cleaning Like solid wood cabinets, it is inevitable that there are some stains and soot stains. Generally, it can be wiped with warm tea water. If it can't be removed, it can be removed with solid wood special cleaning agent to avoid hurting the solid wood itself. Third, regular waxing Regular waxing is a good means of conservation. Generally, the furniture can be coated with a layer of wax every three months. Before each waxing, the old wax needs to be wiped off with milder non-alkaline soapy water. This maintenance of solid wood furniture dust, it is easier to remove stains. Fourth, four seasons nursing Considering that the change of moisture content of solid wood will cause cracking and deformation of solid wood, in order to keep the water content stable, the solid wood furniture in summer must be kept away from the sunlight, and the winter in the north should be kept away from the heating source, and the indoor humidity should be appropriately increased. In addition, if the indoor tide is over, the ground wall should be separated and well absorbed. Five, scratches After the furniture has been used for a long time, it will inevitably be scratched by hard objects. If the scratches are shallow, it only needs to be smoothed with fine sandpaper. If the scratch is very deep, it is necessary to modulate the scratch with a pigment of the same color as the primary color, and then grind it with 502. Six, cracking Use 502 glue to drip into the infiltration site, blow dry with a hair dryer, then smooth with sandpaper, and then paint with pigment. Seven, crack First, cut the scraps into waste paper, add an appropriate amount of alum, boil it into a paste with water, and insert it into the gap. The pulp is very firm after drying. The second is to add wood chips with white glue, stir them evenly and then insert them into the gap. After drying, sanding with sandpaper is also a very practical method, and it is very economical. No matter how good the furniture is, it needs maintenance. I hope this article can help you. Large Baby Booster Seat,Rocking Baby Chair,Baby Outdoor Chair,Baby Dining Chair Zhejiang Lamon Technology Inc. , https://www.chairesbaby.com