[ Chinese wardrobe net ] Women's wardrobe is always a piece of clothing, owning their own personalized wardrobe, is the dream of every girl. In recent years, the overall wardrobe introduced in Europe and the United States has been sought after by many people, and the wardrobe can be purchased according to the space and practical habits of the bedroom. The overall wardrobe is also known as the wall-mounted wardrobe, custom wardrobe, and cloakroom. As people's living standards continue to improve, the overall wardrobe has become an important part of modern home decoration. The overall wardrobe can be tailor-made, factory production is more professional, and environmentally friendly, space-saving, economical and practical, and win the traditional woodworking on-site production and finished wardrobe. The most important part of the overall wardrobe is the board, its quality directly determines the quality of the wardrobe. Therefore, before purchasing the whole wardrobe, you must fully understand all kinds of plates, so as not to be fooled by the business. How much is the overall wardrobe sheet? Demystifying the true face of all kinds of plates The panels on the market are really solid wood, mainly including wood board, particle board, fiberboard, solid wood particle board, solid wood finger joint board and multi-layer solid wood board. Next day, Sohu Focus Home will unveil the true face of these 6 types of plates. Wood board Wood board Wood board, commonly known as large core board, is a plywood with a solid wood core. The core sheet has a high bending strength and a relatively low bending strength. Most of the market is now solid, glued, double-sided sanding, five-layer blockboard, which is one of the most commonly used plates in decoration. These plates have good screw strength, high strength, good quality, sound absorption, heat insulation, etc. The water content is not high, between 10% and 13%, the processing is simple and the most widely used. Due to the large use of urethane glue in the production process of wood board, the formaldehyde emission is generally high and the environmental protection is not good. Particle board Particle board Particleboard is a piece of buds, small diameter wood, fast-growing wood, wood chips, etc., which are cut into certain specifications, dried, mixed with rubber, hardener, water repellent, etc., and pressed at a certain temperature and pressure. A wood-based panel is called a particle board because its section is similar to a honeycomb. The surface of the particle board is flat, the texture is realistic, the weight is uniform, the pollution is resistant, the aging resistance is more beautiful, the paint and various veneers can be applied, and the sound absorption, sound insulation and heat insulation effect are good, and the moisture resistance is strong. The amount of glue used in production is small and the environmental protection is good. Solid wood particle board Solid wood particle board The so-called solid wood particle board is actually a kind of board produced by the process of particle board. It is a kind of particle board, also called oriented structure particle board. It is a kind of small diameter material, thinned wood, wood core, board skin, branch material and so on. A wood-based panel that has been heat-pressed after being processed into a different size of flaking by special equipment, drying, sizing and special equipment. This type of sheet is dried by an advanced single-channel dryer. The expansion coefficient is small and the moisture resistance is very good. The flank is oriented layered, so its internal internal texture is uniform, compared with ordinary particle board and powder. The MDF has strong nail holding force, bending resistance and stability. Such boards are widely used as European and American furniture manufacturers as high-grade environmentally friendly substrates. MDF Fiberboard Fibreboard, also known as MDF, is made from plant fiber as the main raw material, through hot grinding, sizing, paving, hot pressing and other processes. The fiberboard has a density, the low density board fiberboard below 450kg/m3, the medium density fiberboard of 450-880 kg/m3, and the hard fiberboard above 880 kg/m3. This plate retains the original fiber, is pressed by high temperature, has good surface flatness, fine material and good stability. It can be easily shaped and milled. Its strength and hardness are better than particleboard, but it is not resistant to blisters. The amount of expansion is about 2mm on one side, so the MDF is more suitable for a drier environment such as a wardrobe. In addition, the amount of glue used in the production of fiberboard is large, and the environmental protection is slightly poor. Solid wood finger joint Solid wood finger joint Finger joint board, also known as integrated board, laminated material, finger joint material, the board which is made up of deep-processed solid wood small pieces. Because the wooden board adopts a jagged interface, it is similar to the cross-docking of two fingers, so it is called the finger joint board. . Since the raw wood strips are cross-joined, such a combined structure has a certain bonding force, and since the surface plate is not required to be adhered up and down, the glue used is extremely small. Because the joints of solid wood plates are less, the amount of glue used is also less, relatively environmentally friendly, easy to process, cut, drilled, sawed and shaped, but the solid wood finger joints are easily deformed and cracked. The quality of good solid wood finger joints is guaranteed, but the cost is high. Multi-layer solid wood board Multi-layer solid wood board The multi-layer solid wood board is made of multi-layer plywood which is arranged in a crisscross pattern, and the surface is made of high-quality solid wood veneer or technical wood as a fabric, and is produced by several processes such as cold pressing, hot pressing, sanding and health. Since the multi-layer solid wood board is not easily deformed, and the indoor temperature and humidity can be automatically adjusted, the surface layer solid wood skin material has natural natural wood texture and hand feeling, so the selectivity is stronger. Therefore, it is highly favored by consumers. The multi-layer solid wood board has good structural stability and is not easily deformed. Due to the vertical and horizontal gluing, high temperature and high pressure, the deformation defects of the solid wood board are solved from the internal stress. In the production process, the self-made high-quality environmental protection glue is used to make the formaldehyde emission limit of the product meet the national standard requirements and be environmentally friendly. Three strokes to judge whether the board is good or bad 1, cut surface to see the material Look at the panel of the wardrobe is to use high-density board or particle board. Judging from the cut surface of the board, the fine fibers in the high-density board are tightly combined, and the density is large and heavy. The high-density board can withstand large pressure and has a long service life; while the fine particle structure of the particle board is not tight enough, even small pores can be seen, it is lighter in the hand, the gravity is small, and the service life is short. 2, smell the broken environmental protection Whether the sheet substrate is environmentally friendly, as long as the content of free formaldehyde in the sheet is ≤9mg/100g, that is, the European E1 environmental standard, it is not harmful to human health. The most direct way is to open the door and pull it open. If there is a strong irritating smell, even tears, indicating that the formaldehyde content exceeds the standard; the second is to look at the merchant's material testing certificate to see if it holds the relevant national wood-based panel quality. Inspection certificate of the testing center. 3, plate specifications should be kept in mind In order to reduce costs, some small manufacturers currently on the market usually sell dog meat and deceive consumers. The thickness of the standard cabinet body is 18mm, and the small manufacturers generally use the particle board as a high-density board to promote the board thickness of 16 mm, and the consumer said that the board is 18mm. The back panel of the wardrobe is typically 9 mm thick and the door panel is 9 mm thick. How much is the overall wardrobe sheet? Summary: There are many plates for wardrobes on the market. Based on the long-term goal of environmental protection and long-term use, Xiaobian prefers solid wood finger joints and multi-layer solid wood boards. Due to the rigor of material selection and process, the price is relatively high. . The whole wardrobe is generally installed in the bedroom, and we get along with each other day and night. The choice of plates should be cautious when purchasing, and everything is healthy and environmentally friendly.
Our company has manufactured the metal
wire appliances for a long time. Our products are customized according to
customer requirements. Below are some of our products.
1. Compact Dish Rack - 0501501
This dish rack product is popular in the
market. A stack of plates can be placed upright on the rack for a neat and
space-saving look. This rack has a drain tray inside. The water from the plates
drips into the drain tray instead of running on the tabletop. The drain tray is
made of plastic, which is easy to remove for cleaning. It is easy to install as
well. The feet of the shelf are protected by soft rubber caps to avoid
scratching the tabletop. Because the water on the plates will touch the plate
rack, the rack is made of high-quality stainless steel to avoid rusting. The
product is polished after welding. All sharp corners and burrs have been
removed. The surface of the product is smooth and shiny. If customers need
other sizes and shapes of products, our company can design and manufacture
according to customer requirements. Please feel free to contact us.
2. Stainless Steel Barbecue Grill – 0501201
Barbecue is loved all over the world for
its ease of cooking and great taste. It can also be said that barbecue is the
most popular food in the world. In the process of grilling, the grill is the
most commonly used utensil. We offer grills of all shapes and sizes. Our
products can be completely customized according to customer requirements. The
material of the grill is food-grade stainless steel with excellent rust
resistance. All sharp corners and burrs are completely removed by polishing.
There is no risk of scratching the consumers' hands. Over the years, our
company has won the trust of many customers with high quality, reasonable price
and excellent service. If you need such products, welcome to contact us.
3. Cooling Rack for Food - 0500101
This food rack is a simple and
functional product. The top of the rack is flat. Foods can be placed on the
top. The mesh is denser so will not deform the food placed on it. The product
is carefully polished after welding to remove all burrs and sharp edges. No
risk of scratching hands. The surface of the product is shining and easy to
clean. It is made of stainless steel wire, which has excellent rust resistance
and high strength. The product can withstand the weight of heavier foods.
According to the withstand force required by customers, our company can
manufacture products with stainless steel wire of appropriate diameter. We
provide high-quality products at reasonable prices. We can also design other
shapes of products to meet customer requirements.
4. Cookie Rack Cake Rack – 0501001
Food cooling racks are an essential
appliance in catering. I'm sure you'll see similar products in all restaurants
and kitchens. Hot food can be cooled on the rack. Food cooling racks are
usually square and with feet. It can be placed directly on the table or placed
in a tray. We can provide food cooling racks in a variety of sizes and shapes.
Whether customers order food cooling racks individually or with trays that go
together, our products will satisfy customers. Our design team can design new
customized products according to customers' requirements. We look forward to
cooperating with you.
5. Square Fry Basket – 0500601
Fry baskets are often used when frying
food. This basket is rectangular with half-round hooks on the long sides for
hanging from a fryer or other things. The material of this product is
food-grade stainless steel wire. After the product is welded, it is carefully
polished to remove all burrs. The surface of the product is smooth and will not
scratch hands or fingers. This frying basket design has lightweight and high strength.
It is suitable for various occasions. Our company can design and produce
customized products according to customer requirements. We have been adhering
to the principle of customer first, providing high quality and reasonable price
products to customers.
Metal Wire Appliances YRX Technology (Shenzhen) Co., Ltd. , https://www.yrx-tech.com
