[ Chinese wardrobe net ] As a kind of furniture fashion, the wall cabinet is one of the standard configurations of European and American home decoration. It is not only beautiful in appearance, but also makes full use of space. The internal frame can be combined in various ways according to individual requirements, which is an ideal choice for modern living rooms. Want to have a set of cabinets, in addition to the quality of the wall cabinet door, some necessary preparations need to pay attention to: First, the measurement of the closet The cabinet of the wall cabinet can be either a wall or a sandwich, so as to ensure the effective use of space without deformation, but the top and bottom should be horizontal and perpendicular to each other. If there is any error, the hole is required to be left and right. The side height difference is less than 5mm, and the bottom wheel of the closet door can compensate for the error through the debugging system. Second, the installation of the partition The home cabinets generally have drawer design. In order not to affect the use, it is necessary to pay attention to the position of the drawer when designing the three doors. When making three sliding doors, avoid the intersection of the two doors; when making two sliding doors, place them in a door. Side; when making a folding door, the drawer should have a 17cm gap from the side wall. Third, the installation of the track When making the cabinet, the size of the track should be reserved. The upper and lower rails are reserved for the folding door 8cm and the sliding door 10cm. Fourth, the installation of the closet door The professionally guaranteed closet door installation is generally completed by a professional. The steps are: first fix the top rail, the front rail front surface is in the same plane as the cabinet surface, and the upper and lower rails are placed flat in the reserved position; then the two doors are loaded In the track, use the level ruler or ruler to measure the verticality of the door body, adjust the position of the upper and lower rails and fix it well; once again check whether the door body is parallel with the two sides, adjust the door body by adjusting the bottom wheel to reach the level of the frame and both sides; Finally, fix the anti-jump device and present the quality protection book. Based on this installation procedure, the user can verify whether the selected closet door brand is professional. TAISHAN YUEXIN INDUSTRIAL GROUP LIMITED , https://www.gdmetalplasticproducts.com