Small holes easily pinch fingers Gate width is too wide, there are security risks Long screws, insecure Yesterday morning, the Jiangsu Provincial Administration for Industry and Commerce released results of spot checks on the quality of stroller products in seven districts of Wuxi, Xuzhou, Changzhou, Lianyungang, Yangzhou, Zhenjiang and Suqian. The Modern Express reporter learned that 84 batches of 110 batches were qualified and the pass rate was 76.4%. The 110 batches of this test were all from offline stores, including children's bicycles, children's carts and baby walkers. Jiangsu Industrial and Commercial Co., Ltd. Yangzhou City Product Quality Supervision and Inspection Institute conducted testing according to the national standard. The results showed that 14 batches of infant walkers were all qualified. There were 18 batches of children's bicycles and 1 batch was unqualified, mainly due to protrusions. According to the person concerned, the screws on the unqualified bicycle have an outer diameter of 5mm, and the thread protrusion length is 8mm, which exceeds the length of the outer diameter. In addition, the brake handle distance is too wide. The children's hands are small and they can't hold the handles when riding. They can't brake when they are downhill and in an emergency, and they can easily cause injuries. Seventy-eight batches of child carts were unqualified in 25 batches, and the pass rate was only 68.0%. Of these, 13 batches of child carts were unqualified due to the risk of cracks. According to experts, the cart should not have a gap with a width greater than 5mm and less than 12mm. "There is a danger of pinching or pinching your fingers." It is also an important indicator that a stroller can be fixed. In the lock device reliability test, 14 batches were loose and failed. remind Unbranded stroller is unqualified In general, the hardest-hit areas that failed the tests were baby strollers without brand names. The test results show that the passing rate of foreign brands and domestic famous brands of baby carriages is 100%. The passing rate of 53 batches of branded baby carriages was 96.2%, while 57 batches of baby carriages without trademark brands had a passing rate of 57.9%. Moreover, unqualified child strollers are mainly concentrated in the wholesale baby carriage market and small mother-and-baby stores, accounting for more than 70%. So remind parents that when they buy a stroller, they need to go to a regular shop to buy branded products. At the same time pay attention to the baby carriage surface can not have protrusions, sharp corners and cracks. Some detachable small parts should also pay attention to prevent swallowing by children. China Baby Carriage Industry Network arranges for you STAINLESS STEEL SINGLE WALL MUG WUYI YINGYUAN IMP&EXP CO; LTD. , https://www.yingyuandrinkware.com